Andrew Pearson

If you notice a bad odour, you should always give your hose a good clean.. Loss of suction.

In fact, nearly all suction issues can be resolved by removing blockages at these locations.. Related Article:.A Step-By-Step Guide to Cleaning a Vacuum Cleaner.

Brush Roll Isn’t Turning.Miele floorheads with a rotating brush often have a safety mechanism to switch off the belt if there is a blockage..There is usually an obvious cause of this issue once you take a look into the floorhead.

A jam is usually the result of the vacuum sucking up a large item, such as a pet toy, cleaning cloth, or sock.. Make sure you switch off the vacuum and unplug it from the power socket before removing any blockages in the floorhead.Aside from the risk of electrocution, the brush is likely to start spinning as you remove the blockage, which is a serious risk to your hands.. Once you’ve prepared your vacuum, remove the brush and turn it over.

If there’s something blocking the brush roll, rotate the brush in the opposite direction to untangle it.

Don’t use force for this, otherwise there’s a risk of damaging the belt.. After removing the blockage, check that the brush roll rotates freely when you push it by hand.The canister also doesn’t fall over when it’s like this, so you don’t need to keep hold of it.. Let’s take a closer look at how the Shark performs at various household cleaning tasks.. Carpets.

We think the Shark AZ910UKT is an excellent vacuum for cleaning carpets.The powerful suction picks up plenty of dust and rejuvenates flattened carpets, while still being painless to push around.. Again, it’s easy to change settings if needed, and the vacuum still offers effective cleaning in the slower modes.

There’s also an outlet valve on the handle when using the thick carpet setting, to.stop it from suctioning itself to the floor.